• Desktop UV Laser Marking Machine. • EtchON ULM501, is the export series desktop table type UV laser marking machine with 3W UV Laser source and can be upgraded to 5W and 10W as per the requirement. • The control system which are available with us is EZCAD Lite (PC based or Standalone Touch screen). Model: EtchON ULM501 HSN Code:84561000
Industrial laser engraving is rapidly growing industry in the world. Particularly because there is virtually no limit to the number of materials that can engraved whether you are using metal or non-metal:
EtchON ULM501, is the export series desktop table type UV laser marking machine with 3W UV Laser source and can be upgraded to 5W and 10W as per the requirement.:
Precise scanning system- High speed scanning system has been used in the system to get the speedy and precise results in marking.:
The laser head is sealed so as to prevent the optical chamber from Contamination:
UV laser marking machine adopt 355nm pumped UV laser device, so as to get smaller diameter of focusing spot and fine marking effect.:
The metal absorbs UV higher than infrared and therefore more suitable for UV marker marking on metal and glass materials compared with infrared pump machine.:
Narrower pulse width of UV laser makes a shorter time of processing on materials; thus, the materials avoid being deformed or burnt due to thermal.:
With smaller heat affected area and more beautiful marking effect, our products UV laser marking system can meet customer’s demand of higher marking requirements.:
The UV laser marking machine is equipped with safety shield, can effectively isolate the purple radiation, to ensure the safety of UV laser marker operators.:
UV laser marking machine is equipped with professional water-cooling machine, air-cooled water circulation cooling, with water-cooled high efficiency and air-cooled small size.:
Low energy consumption, environmentally friendly, no consumables. Little affect area, no heat effect, without material burned problem.:
Professional Laser marking software with a user-friendly interface and the controls that allows the connection to multiple laser systems with One Computer or with an option of standalone system that is with inbuilt processor, need to attach Computer :
The front panel control module includes the system switch, computer on/off push button, function indicators, main power control MCB.:
Dust and Oil resistant IP65 Switches and Connectors are used:
Adopt water cooling method with external chiller.:
1 | Laser Power | 3W/5W/10W |
2 | Laser Source | JPT |
3 | Mode of Operation | Pulsed |
4 | Working Area | 110x110mm (Upgradable 150x150, 200x200, 250x250 and 300x300) |
5 | Central Emission Wavelength | 355 nm |
6 | Max Linear Marking Speed | ?10000mm/s |
7 | Electrical Requirement | AC220 ± 10%, 50Hz, 10 Amp |
8 | Power Consumed | 1000W |
9 | Frequency | 20-100 kHz |
10 | Cooling Mode | Water Cooled |
11 | Column Type | Manual up and down 500mm |
12 | Upgrade Accessories | 1. Upgradable to rotary fixture. 2. 2. Upgradable to 360 Horizontal indexing |
13 | Control System | 1. EzCAD Main Board (Desktop PC Set or 10” Inbuilt Software Touch screen with wireless keyboard and mouse ). |
Download Brochures